Special Design for Temperature Controlled Water Valve - CA-76T, RCA-76T DC24V / AC220V DIN43650A connector 0.3-0.8Mpa goyen RCA remote control pulse jet valves – Green Power

CA-76T, RCA-76T DC24V / AC220V DIN43650A connector 0.3-0.8Mpa goyen RCA remote control pulse jet valves

Model: CA-76T
Structure: Diaphragm
Working-pressure: 0.3--0.8MPa
Ambient Temperature: -5 ~55
Relative Humidity: < 85 %
Working Medium: Clean Air
Voltage: AC220V DC24V
Diaphragm Life: One Million cycles
Port Size: 3"

Construction
Body: Aluminium (diecast)
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Diaphragm Material: NBR / Viton

Installation
1. Prepare supply and blow tube pipes to suit valve specification. Avoid installing
valves underneath the tank.
2. Ensure tank and pipes avoid dirt, rust or other particulate.
3. Make sure air source is clean and dry.
4, When mount valves to inlet pipes and outlet to the baghouse, ensuring no excess thread
sealant can enter the valve itself. Keep clear in the valve and pipe.
5. Make electrical connections from solenoid to the controller or connect RCA pilot port to pilot valve
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.

 RCA-76T goyen series remote control pulse jet valve 

CA-62T, RCA-62T ,CA-50T, RCA-50T pulse jet valve diaphragm kits

Good quality imported diaphragm shall be selected and used for all the valves, with each part checked in each manufacturing procedure, and put into the assembly line conforming to all the procedures. Ever finished valve shall be taken blowing test.
Diaphragm repair kits suit for DMF series dust collector diaphragm valve
Temperature Range: -40 – 120C ( Nitrile material diaphragm and seal), -29 – 232C (Viton material diaphragm and seal)

Loading time: 7-10 days after payment received
Warranty: Our pulse valve warranty is 1.5 year, all valves comes with basic 1.5 year sellers warranty, if item defective in 1.5 year, We will offer replacement without extra charger(including shipping fee) after we receive the defective products.

Deliver
1. We will arrange deliver immediately after payment when we have storage.
2. We will prepare the goods after confirmed in the contract on time, and deliver ASAP follow the contract exactly when the goods are customized
3. We have a variety of ways to send goods, such as by sea, by air, express as DHL, Fedex, TNT and so on. We also accept deliver arranged by customers.