2017 High quality High Temperature Fiberglass Sleeving - Diaphragm kit K1001 K2000 goyen T series remote valve 1/2″ dust collector pilot valve – Green Power Detail:
Diaphragm kit K1001 K2000 goyen T series remote valve 1/2" dust collector pilot valve
Model: RCA-15T
Structure: Diaphragm
Working-pressure: 0.3--0.8MPa
Ambient Temperature: -5 ~55
Relative Humidity: < 85 %
Working Medium: Clean Air
Voltage: AC220V DC24V
Diaphragm Life: One Million cycles
Port Size: 1/2"
Construction
Body: Aluminium (diecast)
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Diaphragm Material: NBR / Viton
Coil control dust collector valve different with remote control dust collector pilot valve
Installation
1. Prepare supply and blow tube pipes to suit valve specification. Avoid installing
valves underneath the tank.
2. Ensure tank and pipes avoid dirt, rust or other particulate.
3. Make sure air source is clean and dry.
4, When mount valves to inlet pipes and outlet to the baghouse, ensuring no excess thread
sealant can enter the valve itself. Keep clear in the valve and pipe.
5. Make electrical connections from solenoid to the controller or connect RCA pilot port to pilot valve
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
RCA-15T goyen series remote control dust collector pilot valve
Type | Orifice | Port Size | Diaphragm | KV/CV |
CA/RCA20T | 20 | 3/4" | 1 | 12/14 |
CA/RCA25T | 25 | 1" | 1 | 20/23 |
CA/RCA35T | 35 | 1 1/4" | 2 | 36/42 |
CA/RCA45T | 45 | 1 1/2" | 2 | 44/51 |
CA/RCA50T | 50 | 2" | 2 | 91/106 |
CA/RCA62T | 62 | 2 1/2" | 2 | 117/136 |
CA/RCA76T | 76 | 3 | 2 | 144/167 |
CA-15T, RCA-15T, CA-20T, RCA-20T threaded pulse valve diaphragm kits
Good quality imported diaphragm shall be selected and used for all the valves, with each part checked in each manufacturing procedure, and put into the assembly line conforming to all the procedures. Ever finished valve shall be taken blowing test.
Diaphragm repair kits suit for DMF series dust collector diaphragm valve
Temperature Range: -40 – 120C ( Nitrile material diaphragm and seal), -29 – 232C (Viton material diaphragm and seal)
Loading time: 7-10 days after payment received
Warranty: Our pulse valve warranty is 1.5 year, all valves comes with basic 1.5 year sellers warranty, if item defective in 1.5 year, We will offer replacement without extra charger(including shipping fee) after we receive the defective products.
Deliver
1. We will arrange deliver immediately after payment when we have storage.
2. We will prepare the goods after confirmed in the contract on time, and deliver ASAP follow the contract exactly when the goods are customized
3. We have a variety of ways to send goods, such as by sea, by air, express as DHL, Fedex, TNT and so on. We also accept deliver arranged by customers.
Product detail pictures:
Related Product Guide:
Celestion Launches the CDX14-3040 Neodymium Magnet Compression Driver | Brass Quick Connect Couplings
A dream project turned into a contractors’ project | Pilot
With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for 2017 High quality High Temperature Fiberglass Sleeving - Diaphragm kit K1001 K2000 goyen T series remote valve 1/2″ dust collector pilot valve – Green Power, The product will supply to all over the world, such as: French, Houston, Peru, Profession, Devoting are always fundamental to our mission. We've got always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.
By Belinda from Madrid - 2016.10.27 12:12
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Ellen from Auckland - 2016.03.28 16:34